Lindr Beer systems

Showing all 9 results

Filters:
  • Co2 Gas Regulator for beer systems

    1 outlet John Guest ø3/8 – 100 psi – double safety valve – high pressure pipe included l=1.05 mt bs341 n°8 – UK cylinder connection

    £100.00 Add to cart
  • Lindr CWP 200 Green Line mobile, stand 2 x Tap

    The LINDR CWP 200 under- table water cooler is a professional device that stands out from the range of water coolers not only in its design and  quality workmanship, but also in its high performance with small dimensions and easy installation.

    The design of the cooler is a complete novelty in this category of beverage coolers.

    Continuous cooling capacity 170-190l / hour, maximum 200l / hour.

    The modern LINDR compressor refrigeration unit uses input energy for direct conversion to cold and thus guarantees minimum energy consumption.

    High-quality and even cooling of the beverage takes place without thermal shock in a sufficiently long stainless steel screw.

    The device is equipped with an accompanying submersible pump for perfect cooling of the bottled beverage up to the tap.

    A well-chilled drink is ready after only 10-15 minutes. from turning on the device.

    The modern layout of the LINDR cooling technology guarantees simplicity and availability of service interventions and ease of maintenance.

    LINDR cooling technology is 45% more efficient than its electrical input.

    The materials and components used meet the highest requirements of hygienic standards, are a guarantee of trouble-free, quiet operation of the unit and long life of this cooler.

    £1,500.00 Add to cart
  • Lindr KONTAKT 40 GREEN LINE TAPPING DEVICE

    The KONTAKT 40 taps are designed for professional cooling, bottling and serving of well-chilled beer and other beverages at home, garden parties, corporate celebrations and smaller commercial events with the option of offering up to 2 beverages (two-corner version). With its small dimensions and air system, it opens up new possibilities even in professional use.

    GREEN LINE – all models of the KONTAKT 40 series are completely in GREEN LINE design.

    INCREASED PERFORMANCE – tapping equipment of the KONTAKT 40 series with its continuous output of 40-50 l / hour. they allow the serving of about 80-100 well-chilled drinks in one hour.

    EASY TO PORT – easy and safe handling is maintained thanks to the still small dimensions of the tapping device and the two handles located on its upper part.

    EQUIPMENT – a standard part is a thermostat enabling continuous and precise regulation of the beverage temperature, tap (s), drip tray and quick couplings for easy connection.

     

    £825.00 Add to cart
  • Lindr beer system Flow cooler made of oak wood

    A perfectly chilled beer is already in 2-4 minutes. after switching on the in the thermoblock ready.
    The Lindr cooling technology is 45% more efficient than the electrical power consumption.
    The construction is made of high-quality oak and the beverage technology is made of stainless steel . The materials used correspond to the highest hygiene – Standards and guarantee a long service life of this cooler.
    The construction is made of high-quality oak and the beverage technology is made of stainless steel . The materials used meet the highest hygiene standards and guarantee a long service life of this cooler.
    The construction is made of high-quality oak wood and the beverage technology is made of stainless steel . The materials used meet the highest hygiene standards and guarantee a long service life of this cooler.
    The medallion is not part of the basic equipment!

    £750.00 Add to cart
  • Lindr KONTAKT 55 GREEN LINE

    Comes with 2 co2 regulators to suit a stout tap and a lager tap

    £1,250.00 Add to cart
  • Lindr PYGMY 20 GREEN LINE TAPPING DEVICE

    The PYGMY series taps are designed for professional cooling, bottling and serving of well-chilled beer and other beverages in the home environment, smaller garden parties, company celebrations, etc. form the top among small table coolers.

    GREEN LINE – all models of the PYGMY series are completely in the GREEN LINE design (except PYGMY 30K PROFI).

    INCREASED PERFORMANCE – tapping equipment of the PYGMY series with its increased continuous output of 20-35 l / hour. they allow the serving of about 40-70 well-chilled drinks in one hour.

    EASY TO PORT – easy and safe handling thanks to the small dimensions of the tapping device and the handle, which is located on its upper part.

    EQUIPMENT – the standard supplied part is a thermostat enabling continuous and precise regulation of the beverage temperature, tap, tap wrench, drip tray and quick couplings for easy connection.

    £650.00 Add to cart
  • Lindr PYGMY 25 / K EXCLUSIVE 2X KOH

    The PYGMY EXCLUSIVE taps   are designed for professional cooling, bottling and serving of well-chilled beer and other beverages at home, smaller garden parties, company celebrations, etc. form the top among small table coolers.

    BARREL PRESSURE  – PYGMY EXCLUSIVE MODELS are equipped with a completely unique system of a quiet built-in and high-quality air compressor, which contains a suction damper with a molecular filter of the intake air.

    EASY TO PORT  – easy and safe handling thanks to the small dimensions of the tapping device and the recessed handle.

    DESIGN  – luxurious and elegant with a backlit front panel.

    INDIVIDUALITY  – the option of choosing an individual motif of the front backlit panel.

    EQUIPMENT  – the standard supplied part is a thermostat enabling continuous and precise regulation of the beverage temperature, tap, tap wrench, drip tray and quick couplings for easy connection.

    £895.00 Add to cart
  • Lindr PYGMY 25 / K EXCLUSIVE TAPPING DEVICE

    The PYGMY EXCLUSIVE taps are designed for professional cooling, bottling and serving of well-chilled beer and other beverages at home, smaller garden parties, company celebrations, etc. form the top among small table coolers.

    BARREL PRESSURE – PYGMY EXCLUSIVE MODELS are equipped with a completely unique system of a quiet built-in and high-quality air compressor, which contains a suction damper with a molecular filter of the intake air.

    EASY TO PORT – easy and safe handling thanks to the small dimensions of the tapping device and the recessed handle.

    DESIGN – luxurious and elegant with a backlit front panel.

    INDIVIDUALITY – the option of choosing an individual motif of the front backlit panel.

    EQUIPMENT – the standard supplied part is a thermostat enabling continuous and precise regulation of the beverage temperature, tap, tap wrench, drip tray and quick couplings for easy connection.

    £800.00 Add to cart
  • Lindr Soudek 50/K Draught Dispenser

    Double tap draught beer keg dispenser, built in air compressor. Perfect for use with keykegs.

    Brief Product Description

    We are proud to supply high quality Lindr draught beer pouring machines to the Northern Ireland

    Douple tap draught beer keg dispenser with built in air compressor and cooler, pouring upto 35-40L/hr, max 50L/hr. The perfect accessory for a modern restaurant or bar. Wooden wine barrel effect with adjustable temperature.

     Includes

    • Simple set up instructions
    • All necessary pipes and connections to plug in and start pouring – just select your keg coupler and add beer!
    • 12-Month Warranty

    What makes our dispensers different?

    • No need to fill dispenser with water (unlike most dispensers)
    • Just 5 minutes from connecting to pouring ice cold pints (instead of 2-4 hours)
    • Suitable for commercial use
    • Quiet, stylish, portable, compact design conforming to all UK & EU standards
    • Connects to all standard kegs, e.g Carlsberg, Foster’s, John Smith’s, Strongbow Cider, Heineken, Peroni etc.

    What else might you need?

    • Co2 or mixed gas
    • John guest splitter for using gas.
    • Cleaning bottle (sankey coupler to connect if not already purchased)
    • Cleaning fluid.
    • Guinness Nitro Tap
    • Beer tap

    Product Information

    Output or performance (in lit./hour): 35-40L/hr, max 50L/hr.

    Time required to cool: 2-4 min

    Refrigerant: R-134a

    Weight: 33.1kg

    Dimensions: 349mm x 413mm x 530mm

    £1,185.00 Add to cart